Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
SGSN PSP Configuration Mode Commands
sctp-max-path-retx ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
8061
sctp-max-path-retx
This command sets the maximum number of datagram retransmissions for this path.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Peer-Server Configuration > PSP Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type > peer-server id id
> psp instance psp_instance
> psp instance psp_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-ss7rd_id-ps-peer-server_id-psp-psp_instance)#
Syntax
sctp-max-path-retx value
default sctp-max-path-retx
value
Sets the maximum number of datagram retransmission to a destination transport address. This value must be
an integer from 0 to 255.
an integer from 0 to 255.
default
Resets the
sctp-max-path-retx
default to 5.
Usage
Use this command to set the maximum number of datagram retransmissions to a destination transport
address. The destination transport address will be declared unreachable after the SGSN exhausts the
address. The destination transport address will be declared unreachable after the SGSN exhausts the
sctp-
max-path-retx
number of consecutive retransmissions to a destination transport address.
Depending upon network conditions, lower values typically means faster detection of SCTP-Path failure.
Important:
Before using this command to set a value, you must disassociate the PSP instance with the
no
associate
command. When you have set the value with this command, then use the
associate
command to setup a
new association.
Example
sctp-max-path-retx 10