Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
SGSN Service Configuration Mode Commands
cc profile ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
8081
cc profile
Configures the charging characteristic (CC) profile with the triggers for generating various types of CDR as defined
with the
with the
accounting
command.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SGSN Service Configuration
configure > context context_name > sgsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgsn-service)#
Syntax
cc profile profile_bits [ buckets number | interval time | tariff time1 mins hours [
time2 mins hours ] [ time3 mins hours ] [ time4 mins hours ] | volume { downlink down_vol
uplink up_vol | total total_vol } ] +
time2 mins hours ] [ time3 mins hours ] [ time4 mins hours ] | volume { downlink down_vol
uplink up_vol | total total_vol } ] +
[ no | default ] cc profile profile_bits [ buckets | interval | tariff | volumne ]
no
Removes a previously configured CC profile.
default
Returns the specified CC profile to the original default system settings.
profile_bits
Defines the value of the profile bits for the SGSN service.
index
can be configured to any integer value from 0 to 15. Some of the values have been predefined
according to 3GPP standard:
1 for hot billing
2 for flat billing
4 for prepaid billing
8 for normal billing
buckets
number
Specifies the number of statistics container changes in the CDR due to QoS changes or tariff times that can
occur before an accounting record (CDR) is closed
Default: 4
occur before an accounting record (CDR) is closed
Default: 4
number
: Must be integer from 1 to 4.