Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Subscriber Configuration Mode Commands
▀ firewall policy
▄ Cisco ASR 5x00 Command Line Interface Reference
8252
firewall policy
Important:
This command is only available in StarOS 8.0. In StarOS 8.1 and later releases, this configuration is
available in the ACS Rulebase Configuration Mode.
This command enables or disables Stateful Firewall support for the subscriber.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
firewall policy firewall-required
{ default | no } firewall policy
no
Disables Stateful Firewall support for this subscriber.
default
Configures the default setting for Stateful Firewall support.
Default: Disabled
Default: Disabled
firewall-required
Enables Stateful Firewall support for this subscriber.
Usage
Use this command to enable or disable Stateful Firewall support for this subscriber.
Important:
Unless Stateful Firewall support for this subscriber is enabled using this command, firewall
processing for this subscriber is disabled.
Important:
If firewall is enabled, and the rulebase has no firewall configuration, Stateful Firewall will cause all
packets to be discarded.
Example