Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
TFTP Configuration Mode Commands
▀ max servers
▄ Cisco ASR 5x00 Command Line Interface Reference
8396
max servers
Configures the maximum number of TFTP servers that can be started within any 60-second interval. If this limit is
reached, the system waits two minutes before trying to start any more servers.
reached, the system waits two minutes before trying to start any more servers.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Tunnel TFTP Configuration
configure > context context_name > server tftpd
Entering the above command sequence results in the following prompt:
[local]host_name(config-tftpd)#
Syntax
max servers count
count
Default: 40
Specifies the maximum number of servers that can be spawned in any 60-second interval.
Specifies the maximum number of servers that can be spawned in any 60-second interval.
count
must be an
integer from 1 through 100.
Usage
Set the number of servers to tune the system response as a heavily loaded system may need more servers to
support the incoming requests.
The converse would be true as well in that a system can benefit by reducing the number of servers such that
TFTP services do not cause excessive system impact to other services.
support the incoming requests.
The converse would be true as well in that a system can benefit by reducing the number of servers such that
TFTP services do not cause excessive system impact to other services.
Example
max servers 50