Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
UDR Format Configuration Mode Commands
▀ attribute
▄ Cisco ASR 5x00 Command Line Interface Reference
8432
attribute
This command allows you to specify the fields and their order in UDRs.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > UDR Format Configuration
active-charging service service_name > udr-format format_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-udr)#
Syntax
attribute attribute { [ format { MM/DD/YY-HH:MM:SS | MM/DD/YYYY-HH:MM:SS | YYYY/MM/DD-
HH:MM:SS | YYYYMMDDHHMMSS | seconds } [ localtime ] | [ { bytes | pkts } { downlink |
uplink } ] ] priority priority }
HH:MM:SS | YYYYMMDDHHMMSS | seconds } [ localtime ] | [ { bytes | pkts } { downlink |
uplink } ] ] priority priority }
no attribute attribute [ priority priority ]
no
If added previously, removes the specified attribute from the UDR format.
attribute attribute
Specifies the attribute.
attribute
must be one of the following:
Attribute
Description
diameter-session-id
This attribute reports Diameter session identifier.
Important:
This attribute is customer specific, and is only available in 8.3 and
later releases.
failure-handling-mode
This attribute reports failure handling mode in case the Online Charging System (OCS) goes
abnormal.
abnormal.
radius-called-
station-id
station-id
This attribute reports the Called Station ID of the mobile handling the flow.
radius-calling-
station-id
station-id
This attribute reports the Calling Station ID of the mobile handling the flow.
radius-fa-nas-
identifier
identifier
This attribute reports the RADIUS NAS identifier of Foreign Agent (FA).
radius-fa-nas-ip-
address
address
This attribute reports the RADIUS IP address of Foreign Agent (FA).