Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
WSG Lookup Priority List Configuration Mode Commands
▀ priority
▄ Cisco ASR 5x00 Command Line Interface Reference
8476
priority
Sets the priority level for a WSG subnet combination (source and destination netmasks). It also disables an existing
priority for a specified subnet combination. (VPC-VSM only).
priority for a specified subnet combination. (VPC-VSM only).
Product
SecGW
Privilege
Security Administrator
Mode
Exec > Global Configuration > WSG-Lookup Priority List Configuration
configure >> wsg-lookup
Entering the above command sequence results in the following prompt:
Syntax
priority priority_level source-netmask subnet_size destination netmask subnet_size
no priority priority_level source-netmask subnet_size destination netmask subnet_size
no
Disables the priority for the specified subnet combination.
priority
priority_level
Specifies the priority level for the subnet combination as an integer from 1 through 6.
source-netmask
subnet_size
Specifies the subnet size for the source netmask as an integer from 1 through 128.
destination netmask
subnet_size
Specifies the subnet size for the destination netmask as an integer from 1 through 128.
Usage
Use this command to set the priority level for a WSG subnet combination (source and destination netmasks).
It can also be used to disable an existing priority for a specified subnet combination.
It can also be used to disable an existing priority for a specified subnet combination.
Example
The following command sets a priority of 2 for a subnet combination with a /32 subnet size.
priority 2 source-netmask 32 destination-netmask 32