Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
WSG Service Configuration Mode Commands
▀ ip
▄ Cisco ASR 5x00 Command Line Interface Reference
8482
ip
Specifies the IPv4 access group and address allocation method for this WSG service (VPC only).
Product
SecGW (WSG)
Privilege
Security Administrator
Mode
Exec > Global Configuration > Context Configuration > WSG-Service Configuration
configure > context context_name > wsg-service
service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-wsg-service)#
Syntax
ip { access-group group_name | address { alloc-method { dhcp-proxy | local } | pool name
pool_name }
pool_name }
no ip access-group group_name
no ip address alloc-method pool_name
no ip address pool name pool_name
no
Deletes the specified parameter.
access-group
group_name
Specifies an existing IPv4 ACL access group as an alphanumeric string of 1 through 47 characters. For
additional information, see ACL Configuration Mode Commands.
additional information, see ACL Configuration Mode Commands.
address alloc-method { dhcp-proxy | local }
Specifies the method to be used when allocating IPv4 addresses:
dhcp-proxy – allocates via a DHCP server
local – allocates from a local pool (default)
pool name
pool_name
Specifies an existing IPv4 access pool as an alphanumeric string of 1 through 31 characters. Up to 16 named
IPv4 pools can be configured. For additional information, see APN Configuration Mode Commands.
IPv4 pools can be configured. For additional information, see APN Configuration Mode Commands.
Usage
Use this command to specify the IPv4 access group and IPv4 address allocation method for this WSG service.
This command and its keywords are subject to the following limitations:
This command and its keywords are subject to the following limitations: