Cisco Cisco Packet Data Gateway (PDG)

 

▄  Statistics and Counters Reference, StarOS Release 16  

 

 

Slot 

Displays the chassis slot number and card type acronym. 

Card 
Type 

Displays the type of card installed. 

Oper 
State 

Displays the operational state of the card. The possible operational states are: 



 

Active: Indicates that the card is an active component that will be used to process subscriber 
data sessions. 



 

Standby: Indicates that the card is a redundant component. Redundant components will 
become active through manual configuration or automatically should a failure occur. 



 

Offline: Indicates that the card is installed but is not ready to process subscriber data 
sessions. This could be due to the fact that it is not completely installed (such as, the card 
interlock switch is not locked). Refer to the Installation Guide for additional information. 

SPOF 

Displays whether or not the component is a single point of failure (SPOF) in the system. If the 
component is a SPOF, then a Yes will appear in this column. If not, a No will be displayed. 

Attach 
ASR 
5000 
only 

This column if valid only for the ASR 5000 platform. It displays the line card that the Processing 
Cards and SMCs are using for network access. 
This column will only be populated for the RCCs in the event that tasks and processes were migrated 
from an active Processing Card to a standby Processing Card. The RCC creates a path from the 
standby Processing Card to the line cards.