Cisco Cisco Packet Data Interworking Function (PDIF)
Support Data Collector
Configuring SDR Collection ▀
VPC-VSM System Administration Guide, StarOS Release 19 ▄
277
Configuring SDR Collection
The Support Data Record (SDR) is an ordered set of the CLI support commands' display output that is stored in a stand-
alone compressed file. Each CLI support command output is stored in its own record section. The record section is
identified by a record section name and its ASCII command syntax. For example, the record section show_version
would have a CLI command string of “show version”.
alone compressed file. Each CLI support command output is stored in its own record section. The record section is
identified by a record section name and its ASCII command syntax. For example, the record section show_version
would have a CLI command string of “show version”.
The order in which the record section commands appear in the configuration is significant. All of the support record
section commands must be configured together as an ordered set. In other words, just specifying one command by itself
will result in just that one command output constituting the contents of the entire SDR.
section commands must be configured together as an ordered set. In other words, just specifying one command by itself
will result in just that one command output constituting the contents of the entire SDR.
The user may configure a specific set of record sections for the SDR which may or may not include some or all of the
default SDR record sections. This configuration is stored in the Global Configuration section of the configuration file.
Refer to
default SDR record sections. This configuration is stored in the Global Configuration section of the configuration file.
Refer to
command.