Cisco Cisco Packet Data Interworking Function (PDIF)
System Settings
▀ Configuring a Second Management Interface
▄ VPC-VSM System Administration Guide, StarOS Release 19
52
Configuring a Second Management Interface
Refer to the Getting Started chapter for instructions on configuring a system management interface for the StarOS VM.
This section provides described how to configure a second management interface.
This section provides described how to configure a second management interface.
Use the following example to configure a second management interface:
configure
context local
interface interface_name
ip address ipaddress subnetmask
exit
ip route 0.0.0.0 0.0.0.0 gw_address interface_name
exit
port ethernet slot#/
port#
bind interface interface_name local
no shutdown
media [ rj45 | sfp ]
end
Notes:
For port ethernet slot#, always use slot number 1.
Enter IP addresses using IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.
For port ethernet port#, always use slot 1, port 1.
Option: In the Ethernet Port configuration mode, configure the port speed, if needed, by entering the medium
command. Refer to the Command Line Interface Reference for a complete explanation of this command.
In the { ip | ipv6 } route command, other keyword options, instead of the gateway IP address, are available and
include: next-hop IP address, point-to-point, and tunnel.