Cisco Cisco Packet Data Interworking Function (PDIF)
Traffic Performance Optimizer Thresholds
▀ Configuring TPO Thresholds
▄ Thresholding Configuration Guide, StarOS Release 16
176
Configuring TPO Thresholds
This section describes how to enable and configure TPO thresholds.
Enabling TPO Thresholds
To enable TPO thresholds use the following configuration:
configure
threshold monitoring tpo
end
Configuring Threshold Poll Interval
To configure threshold poll interval use the following configuration:
configure
threshold poll tpo-dns-failure interval <interval>
threshold poll tpo-low-compression-gain interval <interval>
threshold poll tpo-rto-timeout interval <interval>
end
Configuring Thresholds Limits
To configure threshold limits use the following configuration:
configure
threshold tpo-dns-failure <high_thresh> clear <low_thresh>
threshold tpo-low-compression-gain <high_thresh> clear <low_thresh>
threshold tpo-rto-timeout <high_thresh> clear <low_thresh>
end