Cisco Cisco Packet Data Interworking Function (PDIF)
Call Setup Thresholds
▀ Call Setup Failure Thresholds
▄ Thresholding Configuration Guide, StarOS Release 16
36
Call Setup Failure Thresholds
Call setup failure thresholds generate alerts or alarms based on the total number of call setup failures experienced by the
system during the specified polling interval.
system during the specified polling interval.
Alerts or alarms are triggered for call setup failures based on the following rules:
Enter condition: Actual number of call setup failures > or = High Threshold
Clear condition: Actual number of call setup failures < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
polling interval.
Configuring Call Setup Failure Thresholds
Use the following example for configuring call setup failure thresholding:
configure
threshold call-setup-failure <high_thresh> [ clear <low_thresh> ]
threshold poll call-setup-failure interval <time>
threshold monitoring call-setup
end