Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador
System Logs
▀ Configuring Trace Logging
▄ Cisco ASR 5500 System Administration Guide
152
Configuring Trace Logging
Trace logging is useful for quickly resolving issues for specific sessions that are currently active. They are temporary
filters that are generated based on a qualifier that is independent of the global event log filter configured using the
logging filter command in the Exec mode. Like event logs, however, the information generated by the logs is stored in
the active memory buffer.
filters that are generated based on a qualifier that is independent of the global event log filter configured using the
logging filter command in the Exec mode. Like event logs, however, the information generated by the logs is stored in
the active memory buffer.
All debug level events associated with the selected call are stored.
Important:
Trace logs impact session processing. They should be implemented for debug purposes only.
Use the following example to configure trace logs in the Exec mode:
[local]host_name#logging trace { callid call_id | ipaddr ip_address | msid ms_id
| username username }
| username username }
Once all of the necessary information has been gathered, the trace log can be deleted by entering the following
command:
command:
[local]host_name#no logging trace { callid call_id | ipaddr ip_address |
msid ms_id | username username }
msid ms_id | username username }