Cisco Cisco Packet Data Gateway (PDG) Guía De Administador
P-GW CDR Field Reference
▀ custom24 Dictionary
▄ Cisco ASR 5x00 GTPP Interface Administration and Reference
176
The field “Served PDP PDN Address Extension”(servedPDPPDNAddressExt) is not part of the 3GPP 32.298
v8.5.0 specification. This field will be available in the CDR only when the CLI command
gtpp attribute
served-pdp-pdn-address-extension
is configured in the GTPP Server Group Configuration Mode. This
field is disabled by default. For more information on this command, refer to the Command Line Interface
Reference.
Reference.
The PGW-CDR field “PS Furnish Charging Information” is available in the custom24 GTPP dictionary only
when the CLI command
gtpp attribute furnish-charging-information
is configured in the GTPP
Server Group Configuration mode.
This field is also available in all 3GPP Rel.7 and Rel.8 dictionaries.
In releases prior to 14.0, for a non-GBR bearer, MBR and GBR values were populated in PGW-CDR. In 14.0
and later releases, as per the standard specification for a non-GBR bearer, MBR and GBR values should be set
to 0. Only for custom24 GTPP dictionary if “
to 0. Only for custom24 GTPP dictionary if “
gtpp attribute apn-ambr
” CLI command is configured then
APN AMBR values are populated in MBR fields of PGW-CDR.
In releases prior to 14.0, the CGISAIChange service condition is present in LOSDV of PGW-CDR even if ULI
Change trigger is disabled. In 14.0 and later releases, if the ULI Change trigger is disabled and if the ULI is
changed, the CGISAIChange service condition is not present in LOSDV of PGW-CDR.
changed, the CGISAIChange service condition is not present in LOSDV of PGW-CDR.
Rulebase change triggered from any external interface e.g. OCS/PCRF, will generate CDR with closure reason
“Management Intervention”. This change is applicable to all standard dictionaries except for custom42 GTPP
dictionary as it is customized to suppress interim CDR.
dictionary as it is customized to suppress interim CDR.
In releases prior to 15.0, when a call is cleared from the chassis, the field “causeForRecordClosing” in a PGW-
CDR shows “Normal Release”. In 15.0 and later releases, the behavior has been changed to comply with 3GPP
specifications. That is, the default “causeForRecordClosing” in PGW-CDR will be “Management
Intervention”. To support this, new keywords have been added to the CLI command “
specifications. That is, the default “causeForRecordClosing” in PGW-CDR will be “Management
Intervention”. To support this, new keywords have been added to the CLI command “
gtpp egcdr
” to control
the value of “causeForRecordClosing” of PGW-CDR when a call is cleared from the chassis.
Important:
This behavioral change is limited to PGW-CDR Release 8 dictionaries only.
ASN.1 Definition for Fields in custom24 Dictionary
The following section provides a complete ASN.1 definition of PGW-CDR. It is based on the ASN.1 definition in 3GPP
TS 32.298.
TS 32.298.
GPRS-PGW-Charging-DataTypes-REL8 DEFINITIONS IMPLICIT TAGS ::=
BEGIN
------------------------------------------------------------------------------
--
-- GPRS RECORDS
--
-- 3GPP 32.298V8.5.0 AND 3GPP 32.251V8.8.0
------------------------------------------------------------------------------