Cisco Cisco Packet Data Gateway (PDG) Notas De La Versión
InTracer Changes in Release 15.0
▀ InTracer Enhancements for November 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
266
InTracer Enhancements for November 30, 2013
This section identifies all of the Cisco InTracer enhancements included in this release:
Feature Changes - new or modified features or behavior changes. For details, refer to the Cisco InTracer
Administration Guide for this release.
Administration Guide for this release.
Command Changes - changes to any of the CLI command syntax. For details, refer to the ASR 5x00 Command Line
Interface Reference for this release.
Interface Reference for this release.
Performance Indicator Changes - new, modified, and deprecated bulk statistics, disconnect reasons, counters and/or
fields in new or modified schema and/or show command output. For details, refer to the ASR 5x00 Statistics and
Counters Reference for this release.
fields in new or modified schema and/or show command output. For details, refer to the ASR 5x00 Statistics and
Counters Reference for this release.
CSCui50281 - Random Session Trace Support in Intracer
Feature Changes
Random Trace Session
Intracer supports random trace sessions. For this, InTracer GUI supports configuration for enabling random subscriber
and also displays the trace data generated.
and also displays the trace data generated.
By default, random Trace is disabled. The user can activate the Random Trace using CLI commands or GUI.
Command Changes
session trace random
New CLI
session trace random
is introduced to configure the random trace with trace information. This command
can be executed in Exec mode.
session trace random number_of_subscribers network-element {ggsn|pgw} [ interface ( all |
interface ) ] collection-entity tce_ip_address
interface ) ] collection-entity tce_ip_address
no session trace random network-element { ggsn | pgw }
Notes:
The subscribers are selected based on the random number generated by the linear congruential algorithm.
number_of_subscriber
to be enabled with random trace is configured through Random trace CLI.
Increasing the
number_of_subscriber
for random trace type is possible at any time.
To decrease the
number_of_subscriber
in Random tracing, user has to disable and reconfigure the CLI.
There is some delay between disabling and reconfiguring the Random trace activation.