Cisco Cisco Packet Data Gateway (PDG) Notas De La Versión
MME Changes in Release 15.0
MME Enhancements for September 30, 2013 ▀
Cisco ASR 5x00 Release Change Reference ▄
347
show mme-service db record
The following fields have been added to display the UE AMBR upload and download throughput.
Max Req Bandwidth UL
Max Req Bandwidth DL
This information is now available in the following commands:
show mme-service db record imsi
<imsi>
show mme-service db record call-id
<call-id>
show mme-service db record guti
<guti>
show mme-service session full all
The following fields have been added to display information for S-GW relocation procedures.
SGW Control TEID
Supported Codec List
Mobile Station Classmark 2
Mobile Station Classmark 3
Marked for Deletion
show mme-service statistics
The following fields have been added to display the Network Induced Location Request (MT-LR) Location Services
(LCS) attempts/successes/failures associated with all MME services on the system.
(LCS) attempts/successes/failures associated with all MME services on the system.
Network Induced Location Request:
Attempted
Success
Failures
The following fields have been added to display Attach reject with cause code ESM failure.
ESM Failure:
Unknown or Missing APN
Rejected By PGW/SGW
Authentication Failed
Svc Opt Not Supported
Svc Opt No Subscribed
The following new counters are available to display the Attempted, Success, Success EPS Only, and Failure statistics for
TAU with TA/LA updating and TAU with IMSI attach:
TAU with TA/LA updating and TAU with IMSI attach:
Combined TA/LA Updating without SGW Relocation
Combined TA/LA Updating with SGW Relocation
TAU with IMSI attach without SGW Relocation