Cisco Cisco Packet Data Gateway (PDG) Notas De La Versión
P-GW Changes in Release 15.0
P-GW Enhancements for November 30, 2013 ▀
Cisco ASR 5x00 Release Change Reference ▄
395
[ default | no ] timeout bearer-inactivity
end
Notes:
Only one threshold is allowed to be configured per APN which is to monitor total, uplink, or downlink traffic.
Bearer inactivity timer is started only when time and volume threshold is configured.
seconds
must be an integer from 900 to 2592000. The minimum configurable value of bearer inactivity timer is
reduced from 3600 seconds to 900 seconds.
volume-threshold downlink
: Threshold value of the downlink data traffic in a bearer.
volume-threshold total
: Threshold value of the uplink and downlink data traffic in a bearer.
volume-threshold uplink
: Threshold value of the uplink data traffic in a bearer.
exclude-default-bearer
: Ignore bearer inactivity handling for default/primary bearer.
default | no
: The bearer inactivity timer is disabled.
CSCui42540 - P-GW: DHCPv6 default UE prefix should be allocated from AAA
and PD from DHCPv6
Feature Changes
DHCPv6 Default UE Prefix Allocated from AAA and PD from DHCPv6
Previous Behavior: Current implementation supports allocation of both default UE prefix and delegated prefixes from
external DHCPv6 server.
external DHCPv6 server.
New Behavior: Added support for allocating default UE prefix from local/AAA and delegated prefix from external
DHCPv6 server.
DHCPv6 server.
CSCui47287 - AAA radius returned ip address should be dynamic for PGW
Feature Changes
RADIUS/S6b Returned IP Address Dynamic for P-GW
Previous Behavior: For P-GW, system considered RADIUS assigned IP address as Static. For GGSN, system
considered both RADIUS and S6b assigned IP addresses as Static.
considered both RADIUS and S6b assigned IP addresses as Static.
New Behavior: With new implementation, system now considers both RADIUS and S6b assigned IP address as
Dynamic at P-GW and GGSN.
Dynamic at P-GW and GGSN.
Customer Impact: The DynAddressFlag AVP, which is sent to P-GW and GGSN CDRs, will now contain value as
Dynamic if IP address is assigned from RADIUS or S6b.
Dynamic if IP address is assigned from RADIUS or S6b.