Cisco Cisco Packet Data Gateway (PDG) Notas De La Versión
SGSN Changes in Release 15.0
▀ SGSN Enhancements for September 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
518
context <ctxt_name>
gprs-service <gprs_srvc_name>
network-sharing cs-ps-coordination [ roamer | homer | failure-code <gmm-cause> ]
end
Notes: Variations of the network sharing command can be used to adjust the CS-PS configuration.
[ no ] network-sharing cs-ps-coordination roamer
– enables/disables the cs-ps-coordination
check for a roamer.
[ no ] network-sharing cs-ps-coordination homer
– enables/disables the cs-ps-coordination check
for a homer.
network-sharing cs-ps-coordination failure-code <gmm-cause>
– sets the gmm cause value to be
sent only when rejecting the Attach/RAU Request with the cause cs-ps-coordination is required. This setting
applies to both
applies to both
homer
and
roamer
. Default is 14.
default network-sharing cs-ps-coordination
– sets the cs-ps-coordination parameters to default. By
default, checking for cs-ps-coordination is enabled for homer and roamer.
network-sharing failure-code
The following command sequence sets the failure code that is used by GPRS MOCN if no failure cause is available
when the SGSN sends a Reject message
when the SGSN sends a Reject message
config
context <ctxt_name>
gprs-service <gprs_srvc_name>
network-sharing failure-code <gmm-cause>
end
Default network sharing failure-code is 7.
plmn id
In support of 2G MOCN network sharing functionality, new keywords are added to the
plmn id
command to define
the common PLMN-Id and an optional list of dedicated PLMN-Ids in the GPRS service.
config
context <ctxt_name>
gprs-service <gprs_srvc_name>
plmn id mcc <mcc_id> mnc <mnc_id> [ network-sharing common-plmn mcc <mcc_id>
mnc <mnc_id> [ plmn-list mcc <mcc_id> mnc <mnc_id> [ mcc <mcc_id> mnc <mnc_id> ] + ] ]
mnc <mnc_id> [ plmn-list mcc <mcc_id> mnc <mnc_id> [ mcc <mcc_id> mnc <mnc_id> ] + ] ]
end
Notes: