Cisco Cisco Packet Data Gateway (PDG) Notas De La Versión
SGSN Changes in Release 15.0
▀ SGSN Enhancements for September 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
522
gtpp suppress-cdrs zero-volume { external-trigger-cdr | final-cdr | internal-
trigger-cdr }
trigger-cdr }
end
idle-mode-signaling-reduction access-type
The
gprs
keyword has been added to this command to provide the option to enable 2G network access for the Idle
Mode Signaling Reduction (ISR) feature.
config
call-control-profile <profile_name>
idle-mode-signaling-reduction access-type gprs
end
Note:
After enabling 2G ISR with the
gprs
keyword, use the
gmm implicit-detach-timeout
command in GPRS
Service Configuration Mode to specify the implicit detach timeout value to use for 2G ISR.
lawful-intercept
The
allow-direct-tunnel
keyword has been added to this command to enable 3G subscriber LI targets to continue
in Direct Tunnel mode rather than 2-tunnel mode. For more information on Lawful Intercept, contact your Cisco
representative.
representative.
map message
This Call Control Profile Configuration Mode command is enhanced with the
mo-fwd-sm
keyword so operators can
instruct the SGSN to include the IMSI of the originating subscriber in the mobile-originated SM transfer.
config
call-control-profile <cc_profile_name>
map message mo-fwd-imsi
remove map message mo-fwd-imsi
end
Note:
The system default is not to include the IMSI.
remove
disables the inclusion of the IMSI.
network-initiated-pdp-activation
The new
secondary
keyword has been added to the
network-initiated-pdp-activation
command in the Call
Control Profile mode. The
secondary
keyword specifies that only network-initiated secondary PDP context activations
(NRSPCAs) are to be allowed.