Cisco Cisco Packet Data Interworking Function (PDIF) Notas De La Versión
P-GW Changes in Release 15.0
P-GW Enhancements for January 31, 2014 ▀
Cisco ASR 5x00 Release Change Reference ▄
389
The explicit configuration of 802.1p/MPLS-EXP is being deprecated and it will be replaced by new construct of
internal-qos.
internal-qos.
Previous Behavior: Operator can set 802.1p and mpls priorities in the
qci-qos-mapping
table.
New Behavior: Operator can only configure internal-qos parameters.
Customer Impact: Due to backward compatibility, previous configuration should still work.
Going forward, customer can only configure
internal-qos
in
qci-qos-mapping
table.
Command Changes
qci
Keywords
802.1p-value
and
mpls-exp-value
have been deprecated. The values provided using these deprecated
keywords will be mapped to new
internal-qos
values.
configure
qci-qos-mapping name
qci num uplink { encaps-header | internal-qos priority priority | user-datagram }
downlink { encaps-header | internal-qos priority priority | user-datagram }
downlink { encaps-header | internal-qos priority priority | user-datagram }
[ default | no ] qci num
end
Notes:
internal-qos
: Set the internal QoS priority where priority is an integer from 0-7, where 7 is the highest
priority and 0 is the lowest priority; These are resolved to L2 values.
Performance Indicator Changes
show apn statistics
“802.1p” removed from “802.1p Priority Marking Statistics” field.
show pgw-service statistics all
“802.1p” removed from “802.1p Priority Marking Statistics” field.
show qci-qos-mapping table all
Output similar to the following is now shown for internal QoS:
uplink: internal-qos priority 5
downlink: internal-qos priority 3
show sgw-service statistics all
“802.1p” removed from “802.1p Priority Marking Statistics” field.