Cisco Cisco Packet Data Interworking Function (PDIF) Notas De La Versión
P-GW Changes in Release 15.0
P-GW Enhancements for September 30, 2013 ▀
Cisco ASR 5x00 Release Change Reference ▄
417
qci-qos-mapping table_name
no qci-qos-mapping
end
authorize-with-hss
This command enables or disables subscriber session authorization via a Home Subscriber Server (HSS) over an S6b
Diameter interface. This feature is required to support the interworking of GGSN with P-GW and HA.
Diameter interface. This feature is required to support the interworking of GGSN with P-GW and HA.
New keywords have been added to enhance granularity for enabling S6b with a P-GW service.
configure
context context_name
pgw-service service_name
authorize-with-hss [ egtp | lma ] [ report-ipv6-addr ]
{ default | no } authorize-with-hss
end
Notes:
egtp
enables S6b authorization for EGTP only.
lma
enables S6b authorization for LMA only.
clear subscribers
The
pgw-address
keyword now can be used to filter for all running services. Previously this keyword was applicable
only for S-GW and SAEGW services. Only those sessions which match the specified filters will be cleared.
clear subscribers pgw-address ipv4/ipv6_address [ filter_keywords ] [ verbose ] [ -
noconfirm ]
noconfirm ]
clear subscribers hsgw-only
The
hsgw-only
keyword has been added to this command. This CLI command will filter all the sessions emerging
from HSGW. The results can be filtered further based on other options selected. Only those sessions which match the
specified filters will be cleared.
specified filters will be cleared.
clear subscribers hsgw-only [ filter_keywords ] [ verbose ] [ -noconfirm ]
clear subscribers pgw-only
The
mag-address
keyword has been added to this command. This CLI command will first filter all the sessions
emerging from P-GW and then further filter the ones that go to the specified MAG address. The results can be filtered
further based on other options selected. Only those sessions which match the specified filters will be cleared.
further based on other options selected. Only those sessions which match the specified filters will be cleared.
clear subscribers pgw-only mag-address ipv4/ipv6_address [ filter_keywords ] [ verbose ]
[ -noconfirm ]
[ -noconfirm ]