Cisco Cisco Packet Data Interworking Function (PDIF) Notas De La Versión
SGSN Changes in Release 15.0
▀ SGSN Enhancements for September 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
526
show gtpu { local-addresses | statistics [ [ gtpu-service <srvc_name> ] [ gtpumgr-
instance <instance> ] [ local-address <ip_address> ] | [ peer-address <ip_address> ] ] [
| { grep <grep_options> | more } ] }
instance <instance> ] [ local-address <ip_address> ] | [ peer-address <ip_address> ] ] [
| { grep <grep_options> | more } ] }
Notes:
show gtpu local-addresses
Displays number of active sessions on all local-addresses in all GTPU
services.
show gtpu statistics local-address <ip_address>
Displays subscriber information per local
GTPU address in a GTPU service.
<ip_address>
Can be any valid IPv4 or IPv6 address.
task
The following command controls the maximum number of LinkMgrs that can be configured:
config
task facility linkmgr max <number>
end
Important:
This value must be set before configuring any SGSN service-related configurations. This command
cannot be set dynamically. If the LinkMgr count is modified dynamically, the system must be rebooted for the change to
take effect.
take effect.
Notes:
The maximum number of linkmgrs has increased from 4 to 12, keeping a default of 4.
timeout
Multiple keywords have been added to the
timeout
command in the LCS service in support of the expanded LCS
functionality:
config
context <context_name>
location-service <location_svc_name>
timeout { area-event-invoke-timer <aietimer_seconds> | lcsn <lcns_seconds> |
periodic-event-invoke-timer <peitimer_seconds> | ue-available-guard-timer
<ueagtimer_seconds>
periodic-event-invoke-timer <peitimer_seconds> | ue-available-guard-timer
<ueagtimer_seconds>
end
Notes:
area-event-invoke-timer
- used to guard the area event invoke procedures. Valid range is 10 to 20seconds;
default is 15.
lcsn
- sets NAS location notification timer (introduced in Release 14.0). Valid range is 10 to 20 seconds;
default is 15.