Cisco Cisco Packet Data Interworking Function (PDIF) Notas De La Versión
SGSN Changes in Release 15.0
SGSN Enhancements for September 30, 2013 ▀
Cisco ASR 5x00 Release Change Reference ▄
529
due to Subscriber unknown
due to BVCI not found
due to blocked BVCI
Perform Location Response dropped
due to LCS not supported
due to Subscriber unknown
show configuration
The output of this command has been enhanced to show whether 2G ISR is enabled, and whether the
gmm implicit-
detach-timeout
value has been configured.
context
<context_name>
idle-mode-signaling-reduction access-type gprs
context <context-name>
gmm implicit-detach-timeout <value>
show call-control-profile full name <
profile_name
>
The output of this command has been enhanced to indicate if 2G ISR is enabled in the Call Control Profile.
Idle-Mode-Signaling-Reducction (ISR) for GPRS:
A new field appears in the output of this command to indicate if the SGSN is configured to include the IMSI of the
originating subscriber in the mobile-originated SM transfer.
originating subscriber in the mobile-originated SM transfer.
MAP MO-FWD-SM Message. Include IMSI:
A new field appears in the output of this command to indicate if the SGSN is configured to include the IMSI of the
originating subscriber in the mobile-originated SM transfer.
originating subscriber in the mobile-originated SM transfer.
MAP MO-FWD-SM Message. Include IMSI:
show configuration, show configuration verbose, show configuration context, show configuration
context verbose
New statistics have been introduced to support LCS-MO-CDRs.
Under GPRS Service, “lcs mo-cdr” is displayed as a accounting cdr type.
Under SGSN Service, “lcs mo-cdr” is displayed as a accounting cdr type.
show gmm-sm statistics
New counters are added to count invalid imsi-detach-requests.
Dropped-Detach-Req
3G-MS-Init-IMSI-Detach-Req-During-actv/sms-auth-ongoing
Two new counters in the command output indicate the total number of currently activated 2G ISR subscribers:
ISR Activated Subscribers: