Cisco Cisco Packet Data Interworking Function (PDIF) Notas De La Versión
System Changes in Release 15.0
▀ System and Platform Enhancements for September 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
620
cmp auto-fetch
Use this command to add a fetch configuration for each certificate for which automatic update is required. This is a
Certificate Management Protocol v2 command.
Certificate Management Protocol v2 command.
configure
cmp auto-fetch current-name cert_name ca-root ca_name time days
cmp cert-store
Use this command to add a file location on /flash disk where the certificates and private keys will be stored. This is a
Certificate Management Protocol v2 command.
Certificate Management Protocol v2 command.
configure
cmp cert-store location pathname [key reuse]
cmp cert-trap time
Defines when an SNMP MIB certificate expiry trap should be sent as the number of hours before expiration.
configure
cmp cert-trap time hours
crypto blacklist file
Configures a blacklist (access denied) file to be used by a security gateway (SeGW).
configure
crypto blacklist file pathname
crypto remote-secret-list
Specifies the name of the remote secret list for storing remote secrets based on the ID type. This command sends you to
the Remote Secret List Configuration mode and the remote-id-id-type command. Only one active remote-secret-list is
supported per system.
the Remote Secret List Configuration mode and the remote-id-id-type command. Only one active remote-secret-list is
supported per system.
configure
crypto remote-secret-listlistname
crypto whitelist file
Configures a whitelist (access permitted) file to be used by a security gateway (SeGW).
configure
crypto whitelist filepathname
Context Configuration Mode – crypto map