Cisco Cisco Aironet 350 Wireless LAN Client Adapter Notas de publicación
5
Release Notes for Cisco Aironet Client Adapter Install Wizard, 1.1 for Windows
OL-4084-01
New and Changed Information
Cisco Aironet Software Requires Completion of Encryption Authorization Form
In order to access Cisco Aironet software from the Software Center on Cisco.com, you must fill out a
form to receive authorization to download encrypted software. Registered Cisco.com users are required
to fill out the form only once, but public users must do so once each session, each time software is
downloaded. A form is automatically created for public users. The form for registered Cisco.com users
is at the following URL:
form to receive authorization to download encrypted software. Registered Cisco.com users are required
to fill out the form only once, but public users must do so once each session, each time software is
downloaded. A form is automatically created for public users. The form for registered Cisco.com users
is at the following URL:
Supporting Documentation
Version OL-1394-06 of the Cisco Aironet Wireless LAN Client Adapters Installation and Configuration
Guide for Windows pertains specifically to versions of the software that are included in Install Wizard
version 1.1. If you are using, installing, or upgrading to previous versions of client adapter software,
refer to a previous version of this manual for information and instructions.
Guide for Windows pertains specifically to versions of the software that are included in Install Wizard
version 1.1. If you are using, installing, or upgrading to previous versions of client adapter software,
refer to a previous version of this manual for information and instructions.
New and Changed Information
Disable Firmware Checking Parameter Added to Install Wizard
A new parameter called Disable Firmware Checking has been added to the Custom Installation screen
of the Install Wizard. This parameter affects the firmware that is bundled with the driver, not the
firmware that is included in the Install Wizard.
of the Install Wizard. This parameter affects the firmware that is bundled with the driver, not the
firmware that is included in the Install Wizard.
The Disable Firmware Checking parameter controls whether the driver (whenever it loads) installs the
firmware with which it is bundled. (The driver loads each time you insert a client adapter or reboot your
computer.) The parameter can be set to one of the following values:
firmware with which it is bundled. (The driver loads each time you insert a client adapter or reboot your
computer.) The parameter can be set to one of the following values:
•
Yes—Prevents the driver from installing the firmware with which it is bundled, enabling the client
adapter to retain its current firmware version. This is the default value.
adapter to retain its current firmware version. This is the default value.
•
No—Causes the driver to install the firmware with which it is bundled if that firmware is newer than
the firmware that is currently installed in the client adapter.
the firmware that is currently installed in the client adapter.
Caution
Both of the client adapter’s LEDs light continuously while the firmware upgrade occurs. Do not eject
the client adapter while the firmware is being upgraded.
the client adapter while the firmware is being upgraded.
Note
The Disable Firmware Checking parameter is functionally equivalent to the Automatically Load New
Firmware When NDIS Driver Is Updated parameter on the ACU Preferences screen. The parameter
that is set last is the one that governs how the driver behaves.
Firmware When NDIS Driver Is Updated parameter on the ACU Preferences screen. The parameter
that is set last is the one that governs how the driver behaves.