Cisco Cisco WAP2000 Wireless-G Access Point - PoE Manual De Mantenimiento

Placement Tips

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

9

 

You can place your WAP2000 on a desktop or mount it on a wall.

•

Ambient Temperature—To prevent the WAP2000 from overheating, do not 
operate it in an area that exceeds an ambient temperature of 131°F (55°C).

•

Air Flow—Be sure that there is adequate air flow around the WAP2000.

•

Mechanical Loading—Be sure that the WAP2000 is level and stable to 
avoid any hazardous conditions.

•

Power Outlet—Choose a location that is within reach of a power outlet.

For desktop placement, place the WAP2000 horizontally on a flat surface so it sits 
on its four rubber feet. 

The WAP2000 can be mounted either vertically or horizontally.

Determine where you want to mount the access point and install two screws (not 
supplied) into the wall for either vertical or horizontal placement. 

For horizontal placement, orient the access point as shown:

276237

Wall

mount

slots

5-7/8˝