Cisco Cisco WAP2000 Wireless-G Access Point - PoE Manual De Mantenimiento
Getting Started
Navigating the Web-Based Utility
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
14
5
Access Point depends upon the type of architecture and operating system you
are using. Use your computer’s local Help and Support functionality and search for
“IP Addressing.”
are using. Use your computer’s local Help and Support functionality and search for
“IP Addressing.”
STEP 3
Launch a web browser, such as Internet Explorer or Mozilla Firefox.
STEP 4
In the Address field enter the default DHCP address and press the Enter key.
STEP 5
In the User Name and Password fields enter the default of admin.
STEP 6
Click OK.
The Setup window of the web-based utility appears.
Navigating the Web-Based Utility
The web-based utility consists of five main windows:
•
Setup
•
Wireless
•
AP Mode
•
Administration
•
Status
Additional windows branch out from these main windows. For a basic network
setup, you may only need to use the following windows of the web-based
configuration utility:
setup, you may only need to use the following windows of the web-based
configuration utility:
•
Setup—Enter your basic network settings.
•
Management—Click Administration > Management and create a new
password to replace the default password (admin).
password to replace the default password (admin).
•
Wireless—To change the default SSID, click Wireless > Basic Settings and
make the necessary changes. To change the level of security, click
Wireless > Security and make the necessary changes.
make the necessary changes. To change the level of security, click
Wireless > Security and make the necessary changes.