Cisco Cisco WAP2000 Wireless-G Access Point - PoE Manual De Mantenimiento
Configuring the WAP2000 Access Point
Configuring the Access Point’s Modes of Operation
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
48
6
STEP 4
Click Save.
Configuring the Access Point’s Modes of Operation
The AP Mode > AP Mode window displays the access point mode settings for the
access point.
access point.
The access point offers three mutually exclusive modes of operation:
•
Access Point (default)—Connects your wireless computers to a wired
network. In most cases, no change is necessary when choosing this mode.
network. In most cases, no change is necessary when choosing this mode.
•
Wireless Repeater—Allows you to communicate with, and re-transmit the
signal of another remote wireless access point device if this access point is
within its range.
signal of another remote wireless access point device if this access point is
within its range.
•
Wireless Bridge—Wirelessly connects your wired network to other
physically separate wired networks having their own access points
similarly configured as wireless bridges. Wireless clients cannot connect to
the access point in this mode.
physically separate wired networks having their own access points
similarly configured as wireless bridges. Wireless clients cannot connect to
the access point in this mode.
The access point’s mode is set to Access Point by default. This connects your
wireless devices to a wired network. In most cases, no change is necessary.
wireless devices to a wired network. In most cases, no change is necessary.