Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup Manual De Mantenimiento

Simple Network Management Protocol

Groups

Cisco Small Business WAP371 Wireless Access Point Administration Guide 

171

8

A family mask is used to define a family of view subtrees. The family mask indicates 
which subidentifiers of the associated family OID string are significant to the family's 
definition. A family of view subtrees enables efficient control access to one row in a 
table.

STEP  4

Click Save. The view is added to the SNMPv3 Views list and your changes are saved to the 
Startup Configuration.

NOTE

To remove a view, select the view in the list and click Delete.

Groups

SNMPv3 groups allow you to combine users into groups of different authorization and access 
privileges. Each group is associated with one of three security levels:

•

noAuthNoPriv

•

authNoPriv

•

authPriv

Access to Management Information Bases (MIBs) for each group is controlled by associating 
a MIB view to a group for read or write access, separately.

By default, the AP has two groups:

•

RO—A read-only group using authentication and data encryption. Users in this group 
use an MD5 key/password for authentication and a DES key/password for encryption. 
Both the MD5 and DES key/passwords must be defined. By default, users of this group 
have read access to the default all MIB view. 

•

RW—A read/write group using authentication and data encryption. Users in this group 
use an MD5 key/password for authentication and a DES key/password for encryption. 
Both the MD5 and DES key/passwords must be defined. By default, users of this group 
have read and write access to the default all MIB view.

NOTE

The default groups RO and RW cannot be deleted.

NOTE

The AP supports a maximum of eight groups.

To add and configure an SNMP group: