Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup Manual De Mantenimiento
Administration
Management Access Control
Cisco Small Business WAP371 Wireless Access Point Administration Guide
53
3
If an SSL certificate (with a .pem extension) exists on the WAP device, you can download it to
your computer as a backup. In the Download SSL Certificate (From Device to PC) area, select
HTTP or TFTP for the Download Method and click Download.
your computer as a backup. In the Download SSL Certificate (From Device to PC) area, select
HTTP or TFTP for the Download Method and click Download.
•
If you select HTTP, you are prompted to confirm the download and then to browse to
the location to save the file on your network.
the location to save the file on your network.
•
If you select TFTP, additional fields appear to enable you to enter the File Name to
assign to the downloaded file, and enter the TFTP server address where the file will be
downloaded.
assign to the downloaded file, and enter the TFTP server address where the file will be
downloaded.
You can also upload a certificate file (with a .pem extension) from your computer to the WAP
device. In the Upload SSL Certificate (From PC to Device) area, select HTTP or TFTP for the
Upload Method.
device. In the Upload SSL Certificate (From PC to Device) area, select HTTP or TFTP for the
Upload Method.
•
For HTTP, browse to the network location, select the file, and click Upload.
•
For TFTP, enter the File Name as it exists on the TFTP server and the TFTP Server
IPv4 Address, then click Upload. The filename cannot contain the following
characters: spaces, <, >, |, \, : , (, ), &, ; , #, ? , *, and two or more successive periods.
IPv4 Address, then click Upload. The filename cannot contain the following
characters: spaces, <, >, |, \, : , (, ), &, ; , #, ? , *, and two or more successive periods.
A confirmation appears when the upload was successful.
Management Access Control
You can create an access control list (ACL) that lists up to five IPv4 hosts and five IPv6 hosts
that are authorized to access the WAP device configuration utility. If this feature is disabled,
anyone can access the configuration utility from any network client by supplying the correct
WAP device username and password.
that are authorized to access the WAP device configuration utility. If this feature is disabled,
anyone can access the configuration utility from any network client by supplying the correct
WAP device username and password.
If the management ACL is enabled, access through the web and SNMP is restricted to the
specified IP hosts.
specified IP hosts.
!
CAUTION
Verify any IP address that you enter. If you enter an IP address that does not match your
Administrative computer, you will lose access to the configuration interface. It is highly
recommend to give the Administrative computer a static IP address, so the address does not
change over time.
Administrative computer, you will lose access to the configuration interface. It is highly
recommend to give the Administrative computer a static IP address, so the address does not
change over time.
To create an access list: