Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup Manual De Mantenimiento

Administration

Reboot

Cisco Small Business WAP371 Wireless Access Point Administration Guide 

59

3

To copy a file to another file type:

STEP 1

Select Administration > Copy/Save Configuration in the navigation pane. 

STEP  2

Select the Source File Name:

•

Startup Configuration—Configuration file type used when the WAP device last booted. 
This does not include any configuration changes applied but not yet saved to the WAP 
device.

•

Backup Configuration—Backup configuration file type saved on the WAP device.

•

Mirror Configuration—If the Startup Configuration is not modified for at least 24 hours, 
it is automatically saved to a Mirror Configuration file. The Mirror Configuration file is 
a snapshot of a past Startup Configuration. The Mirror Configuration is preserved 
across factory resets, so it can be used to recover a system configuration after a factory 
reset by copying the Mirror Configuration to the Startup Configuration.

STEP  3

For the Destination File Name, select the file type to be replaced with the file you are copying. 

STEP  4

Click Save to begin the copy process.

When complete, a window shows the message, Copy Operation Successful.

Reboot

You can use the Reboot page reboot the AP.

STEP 1

To reboot the WAP, select Administration > Reboot in the navigation pane.

STEP  2

Select one of these options:

•

Reboot—Reboots the WAP using Startup Configuration.

•

Reboot to Factory Default—Reboots the WAP using the factory default configuration 
file. Any customized settings are lost.

A window appears to enable you to confirm or cancel the reboot. The current management 
session might be terminated.

STEP  3

Click OK to reboot.