Cisco Cisco WAP200 Wireless-G Access Point - PoE Rangebooster Notas de publicación
Release Notes for the Cisco WAP200 Wireless-G Access Point with PoE and RangeBooster Version 2.0.4.0
3
Release Notes
Open Caveats in Release 2.0.4.0
•
The current Administration Guide is not fully compliant with the GUI for this
release.
release.
•
HTTPS certificate is expired (SSL certificate can be imported and exported
using the GUI).
using the GUI).
Resolved Caveat in Release 2.0.4.0
•
Spanning Tree Protocol (STP) Setup can now be configured in the Basic
Setup page.
Setup page.
Open Caveats in Release 2.0.2.4
•
An erroneous SNMP inform/trap “SNMPv2-MIB:warmStart
inform:SNMPv2c…” and “SNMP2-MIB:warmStart trap:SNMPv2c…” is sent
when the WAP200 device renews its IP address upon DHCP expiration as
set on the router. This will cause the SNMP daemon to restart. To continue
to use the uninterrupted SNMP feature, increase the router’s DHCP
expiration timer. Currently, this happens at half the DHCP expiration timer
value. For example, if you want to use uninterrupted SNMP for 12 hrs,
please set this timer to 24 hrs.
inform:SNMPv2c…” and “SNMP2-MIB:warmStart trap:SNMPv2c…” is sent
when the WAP200 device renews its IP address upon DHCP expiration as
set on the router. This will cause the SNMP daemon to restart. To continue
to use the uninterrupted SNMP feature, increase the router’s DHCP
expiration timer. Currently, this happens at half the DHCP expiration timer
value. For example, if you want to use uninterrupted SNMP for 12 hrs,
please set this timer to 24 hrs.
•
It is recommended to use either Internet Explorer 7 or later, or Firefox 3.0 or
later as your internet browser. Google Chrome is not a fully supported
browser. When using Google Chrome, the SSL Certificate extension
downloads as "wap200.download." This is an invalid extension and needs
to be changed to a “.crt” extension.
later as your internet browser. Google Chrome is not a fully supported
browser. When using Google Chrome, the SSL Certificate extension
downloads as "wap200.download." This is an invalid extension and needs
to be changed to a “.crt” extension.
Resolved Caveats in Release 2.0.2.4
•
When the user chooses another AP mode then returns to the original mode,
the MAC fields will be reset.
the MAC fields will be reset.
•
When the Set Bandwidth Utilization Threshold is set to 1, it will cause a
wireless client to be unassociated with the WAP200 device.
wireless client to be unassociated with the WAP200 device.
•
Fixed GUI issues.
•
SSL certificate can now be easily imported and exported using the GUI;
effective starting with this release.
effective starting with this release.