Cisco Cisco WAP200E Wireless-G Exterior Access Point - PoE Hoja De Datos

Data Sheet

Page 2 of 5

To protect your data and privacy, the Cisco WAP200E supports both Wired Equivalent Privacy (WEP) and the

industrial-strength wireless security of Wi-Fi Protected Access (WPA), encoding all of your wireless transmissions

with powerful encryption. The MAC address filter lets you decide who can access your wireless network, and

advanced logging keeps you apprised of access attempts. Configuration is a snap with the web browser-based

configuration utility.

RangeBooster technology, a compatible add-on to standard Wireless-G, can nearly double the range of your

wireless network and increase its throughput by up to 35 percent. Unlike ordinary wireless technologies that are

confused by signal reflections, RangeBooster uses two smart receivers at each end to detect and decode reflected

signals at distances where standard technologies give up. You’ll find that “dead spots” in the wireless coverage area

are reduced as well.

The integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and

wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.

Additional features such as multiple BSSIDs, wireless roaming, and auto-channel selection make the Cisco

WAP200E ideal for your business.

Features

●

Lightning-protected, weather-resistant housing

●

10BASE-T/100BASE-TX Ethernet port, auto-sensing half/full duplex, and automatic medium dependent

interface (MDI) and MDI crossover (MDI-X)

●

Built-in 6-dBi directional antenna with 1x2 multiple-input, multiple-output (MIMO) to increase coverage

●

Obtains power via 802.3af PoE from a PoE switch or power injector

●

Simplified web interface for installation and configuration

●

802.1X RADIUS authentication

●

Supports WEP, WPA Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA Enterprise, and WPA2 Enterprise

wireless security

●

Supports four BSSIDs and 802.1Q VLAN to service set identifier (SSID) mapping

●

Supports Simple Network Management Protocol (SNMP) and uses an intuitive web-based interface

●

Supports Wi-Fi Multimedia (WMM) wireless QoS

●

Supports wireless roaming based on 802.11F (Inter-Access Point Protocol [IAPP])

●

Offers access point, bridge mode, and repeater mode

●

Supports wireless security monitoring (working together with Cisco WMP200, WPC200, and WUSB200

adapter cards)

●

Supports wireless client isolation

●

Limited lifetime warranty

Specifications

Table 1 lists the specifications, package contents, and minimum requirements for the Cisco WAP200E Wireless-G

Exterior Access Point.