Cisco Cisco WAP321 Wireless-N Access Point with Single Point Setup Notas de publicación
Release Notes for the Cisco WAP121 and WAP321 Wireless Access Points
15
Release Notes
Resolved Issues
CSCtx68659—Bonjour does not operate at the very first bootup of the WAP321
device.
device.
Open Caveats
Table 7 Open Caveats in Firmware Version 1.0.2.3
Ref Number
Description
CSCub46649
Symptom:
While operating WDS Bridging using a 2.4 GHz band with a 20/40 MHz
channel bandwidth, the WDS links may disconnect. The radio can change from 40 MHz
to 20 MHz if any 20 MHz devices are detected in the area, resulting in a mismatch of
channel bandwidths throughout the WDS devices.
to 20 MHz if any 20 MHz devices are detected in the area, resulting in a mismatch of
channel bandwidths throughout the WDS devices.
Workaround:
Configure WDS links using the 20 MHz channel bandwidth.
CSCub46043
Symptom:
When untagged packets are received on a VAP interface (SSID), they may
be treated as tagged packets.
CSCub45975
Symptom:
In a radio saturated environment, Work Group Bridge mode can take from
three to seven minutes to establish connectivity with the remote upstream access point.
CSCtx04467
Symptom:
When DHCP connectivity is changed to a static IP address, the browser
does not automatically redirect the web-based configuration utility to the new IP
address.
address.
Workaround:
Type in the new static IP address into the URL field and login again.