Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup Notas de publicación
6
Release Notes
Cisco WAP121 and WAP321 Wireless Access Points,
Firmware Version 1.0.1.10
Firmware Version 1.0.1.10
Version 1.0.1.10
August, 2012
These release notes describe the open issues for the Cisco WAP121 and WAP321
Wireless Access Points.
Wireless Access Points.
Requirements
•
Your computer must meet the recommended hardware and software
requirements.
requirements.
•
A computer with Browser support for:
-
Internet Explorer v7.0 or later
-
Chrome v5.0 or later
-
Firefox v3.0 or later
-
Safari v3.0 or later
Limitations
•
Due to security concerns, Telnet and SSH access options are removed in
firmware version 1.0.1.10.
firmware version 1.0.1.10.
•
CSCty78355. The Cisco WAP321 and WAP121 devices do not support
multicast traffic over Work Group Bridge mode. This is a design limitation of
the Wireless Ethernet in Work Group Bridge. Work Group Bridge translates
and maps an IP address to a MAC address in the WET table, which works
only for Unicast IP addresses.
multicast traffic over Work Group Bridge mode. This is a design limitation of
the Wireless Ethernet in Work Group Bridge. Work Group Bridge translates
and maps an IP address to a MAC address in the WET table, which works
only for Unicast IP addresses.
Resolved Issues
•
CSCtx60443—Closed. Functioning as designed. Create additional ACL
rules or a Layer 3 network design.
rules or a Layer 3 network design.
•
CSCtx08343
•
CSCtx04211