Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup Notas de publicación
Release Notes for the Cisco WAP121 and WAP321 Wireless Access Points
3
Release Notes
Resolved Issues
CSCtx68659—Bonjour does not operate at the very first bootup of the WAP321
device.
device.
Open Caveats
Table 1 Open Caveats in Firmware Version 1.0.2.3
Ref Number
Description
CSCub46649
Symptom:
While operating WDS Bridging using a 2.4 GHz band with a 20/40 MHz
channel bandwidth, the WDS links may disconnect. The radio can change from 40 MHz
to 20 MHz if any 20 MHz devices are detected in the area, resulting in a mismatch of
channel bandwidths throughout the WDS devices.
to 20 MHz if any 20 MHz devices are detected in the area, resulting in a mismatch of
channel bandwidths throughout the WDS devices.
Workaround:
Configure WDS links using the 20 MHz channel bandwidth.
CSCub46043
Symptom:
When untagged packets are received on a VAP interface (SSID), they may
be treated as tagged packets.
CSCub45975
Symptom:
In a radio saturated environment, Work Group Bridge mode can take from
three to seven minutes to establish connectivity with the remote upstream access point.
CSCtx04467
Symptom:
When DHCP connectivity is changed to a static IP address, the browser
does not automatically redirect the web-based configuration utility to the new IP
address.
address.
Workaround:
Type in the new static IP address into the URL field and login again.