Cisco Cisco WAP321 Wireless-N Access Point with Single Point Setup Notas de publicación
6
Release Notes
Cisco WAP121 and WAP321 Wireless Access Points,
Firmware Version 1.0.0.3
Firmware Version 1.0.0.3
April, 2012
Version 1.0.0.3
These release notes describe the open issues for the
Cisco WAP121 and WAP321 Wireless Access Points.
Cisco WAP121 and WAP321 Wireless Access Points.
Limitations
•
When working with an SSL Certificate, use only a file with a .pem extension.
Others files with extensions such as: cer, .crt, or .key will fail.
Others files with extensions such as: cer, .crt, or .key will fail.
•
CSCty78355. The Cisco WAP321 and WAP121 devices do not support
multicast traffic over Work Group Bridge mode. This is a design limitation of
the Wireless Ethernet in Work Group Bridge. Work Group Bridge translates
and maps an IP address to a MAC address in the WET table, which works
only for Unicast IP addresses.
multicast traffic over Work Group Bridge mode. This is a design limitation of
the Wireless Ethernet in Work Group Bridge. Work Group Bridge translates
and maps an IP address to a MAC address in the WET table, which works
only for Unicast IP addresses.
Resolved Issues
This is a new release.
CSCtx04467
Symptom:
When DHCP connectivity is changed to a static IP address, the browser
does not automatically redirect the web-based configuration utility to the new IP
address.
address.
Workaround:
Type in the new static IP address into the URL field and login again.
Table 2 Open Caveats in Firmware Version 1.0.1.10
Ref Number
Description