Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento
Wireless
MAC Filtering
Cisco WAP131 and WAP351 Administration Guide
101
5
STEP 3
In the MAC Address field, enter the MAC address to allow or block and click Add.
The MAC address appears in the Stations List.
STEP 4
Continue entering MAC addresses until the list is complete, and then click Save.
The changes are saved to the Startup Configuration.
The changes are saved to the Startup Configuration.
NOTE
To remove a MAC address from the Stations List, select it and then click Remove.
NOTE
After new settings are saved, the corresponding processes may be stopped and
restarted. When this condition happens, the WAP device may lose connectivity. We
recommend that you change the WAP device settings when a loss of connectivity
will least affect your wireless clients.
restarted. When this condition happens, the WAP device may lose connectivity. We
recommend that you change the WAP device settings when a loss of connectivity
will least affect your wireless clients.
Configuring MAC Authentication on the RADIUS Server
If one or more VAPs are configured to use a MAC filter stored on a RADIUS
authentication server, you must configure the station list on the RADIUS server. The
format for the list is described in this table:
authentication server, you must configure the station list on the RADIUS server. The
format for the list is described in this table:
RADIUS Server
Attribute
Attribute
Description
Value
User-Name (1)
MAC address of the client station.
Valid Ethernet
MAC address
MAC address
User-Password
(2)
(2)
A fixed global password used to look up
a client MAC entry.
a client MAC entry.
NOPASSWORD