Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento

System Settings

Cisco WAP131 and WAP351 Administration Guide

36

Use the System Settings page to configure information that identifies the WAP 
device within the network.

To configure system settings:

Select Administration > System Settings.

Configure these parameters:

•

Host Name—Enter the host name for the WAP device. By default, the name 
is the fully qualified domain name (FQDN) of the node. The default host name 
is wap concatenated with the last 6 hexidecimal digits of the MAC address 
of the WAP device. The host name label can contain only letters, digits, and 
hyphens. It cannot begin or end with a hyphen. No other symbols, 
punctuation characters, or blank spaces are permitted. The host name can 
be 1 to 63 characters long.

•

System Contact—Enter the contact person for the WAP device. The system 
contact can be 0 to 255 characters long and can include spaces and special 
characters.

•

System Location—Enter the physical location of the WAP device. The 
system location can be 0 to 255 characters long and can include spaces and 
special characters.

Click Save. The changes are saved to the Startup Configuration.

One management user is configured on the WAP device by default:

•

User Name: cisco

•

Password: cisco

Use the User Accounts page to configure up to four additional users and to change 
a user password.