Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento

HTTP/HTTPS Service

Cisco WAP131 and WAP351 Administration Guide

46

When a user logs on to the configuration utility of the WAP device, a session 
is created. This session is maintained until the user logs off or the session 
timeout expires. The range is from 1 to 10 sessions. The default is 5. If the 
maximum number of sessions is reached, the next user who attempts to log 
on to the configuration utility receives an error message about the session 
limit.

•

Session Timeout—Enter the maximum amount of time, in minutes, that an 
inactive user remains logged on to the configuration utility. When the 
configured timeout is reached, the user is automatically logged off. The 
range is from 1 to 60 minutes. The default is 10 minutes.

Configure the HTTP and HTTPS services:

•

HTTP Server—Enable or disable access through HTTP. By default, HTTP 
access is enabled. If you disable it, any current connections using that 
protocol are disconnected.

•

HTTP Port—Enter the logical port number to use for HTTP connections, 
from 1025 to 65535. The default port number for HTTP connections is the 
well-known IANA port number 80.

•

HTTPS Server—Enable or disable access through secure HTTP (HTTPS). 
By default, HTTPS access is enabled. If you disable it, any current 
connections using that protocol are disconnected.

•

HTTPS Port—Enter the logical port number to use for HTTPS connections, 
from 1025 to 65535. The default port number for HTTPS connections is the 
well-known IANA port number 443.

•

Redirect HTTP to HTTPS—Redirects management HTTP access attempts 
on the HTTP port to the HTTPS port. This field is available only when HTTP 
access is disabled.

Click Save. The changes are saved to the Startup Configuration.