Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento
Administration
Spanning Tree Settings
Cisco WAP131 and WAP351 Administration Guide
64
3
To configure the STP settings on the Cisco WAP351:
STEP 1
Select Administration > Spanning Tree Settings.
STEP 2
Configure these parameters:
•
STP Status—Enables or disables STP globally on the Cisco WAP351. By
default, STP is enabled.
default, STP is enabled.
•
Flood BPDU if STP is disabled on port(s)—Check to flood the BPDU
packets received from the port(s) whose STP status is disabled, or uncheck
to drop the BPDU packets received from the port(s) whose STP status is
disabled.
packets received from the port(s) whose STP status is disabled, or uncheck
to drop the BPDU packets received from the port(s) whose STP status is
disabled.
•
Per Port STP Status Setting—Check to enable STP on a port, or uncheck
to disable STP on a port.
to disable STP on a port.
STEP 3
Click Save. The changes are saved to the Startup Configuration.