Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento

IPv6 Setting

Cisco WAP131 and WAP351 Administration Guide

70

•

Static IP Address, Subnet Mask, and Default Gateway—If you want to 
assign a static IP address, enter the IP information in these fields.

•

Domain Name Servers—Select one of the following options:

-

Dynamic—The WAP device acquires the DNS server addresses from a 
DHCP server on the LAN.

-

Manual—Manually configure one or more DNS server addresses. Enter 
up to two IP addresses in the fields provided.

Click Save. The changes are saved to the Startup Configuration.

After new settings are saved, the corresponding processes may be stopped and 
restarted. When this condition happens, the WAP device may lose connectivity. We 
recommend that you change the WAP device settings when a loss of connectivity 
will least affect your wireless clients.

Use the IPv6 Setting page to configure the WAP device to use IPv6 address and 
IPv6 tunnel.

To configure IPv6 address settings:

Select LAN > IPv6 Setting.

Configure these parameters:

•

IPv6 Connection Type—Choose how the WAP device obtains an IPv6 
address:

-

DHCPv6—The IPv6 address is assigned by a DHCPv6 server.

-

Static IPv6—Manually configure the IPv6 address. The IPv6 address 
should be in a form similar to xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx 
(2001:DB8::CAD5:7D91).

•

IPv6 Administrative Mode—Enables or disables IPv6 management access.

•

IPv6 Auto Configuration Administrative Mode—Enables or disables IPv6 
automatic address configuration on the WAP device.