Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento
Wireless
Radio
Cisco WAP131 and WAP351 Administration Guide
80
5
•
TSPEC Mode—Regulates the overall TSPEC mode on the WAP device. By
default, the TSPEC mode is off. The options are:
default, the TSPEC mode is off. The options are:
-
On—The WAP device handles TSPEC requests according to the TSPEC
settings that you configure on the Radio page. Use this setting if the WAP
device handles traffic from the QoS-capable devices, such as a Wi-Fi
CERTIFIED phone.
settings that you configure on the Radio page. Use this setting if the WAP
device handles traffic from the QoS-capable devices, such as a Wi-Fi
CERTIFIED phone.
-
Off—The WAP device ignores TSPEC requests from client stations. Use
this setting if you do not want to use TSPEC to give the QoS-capable
devices priority for time-sensitive traffic.
this setting if you do not want to use TSPEC to give the QoS-capable
devices priority for time-sensitive traffic.
•
TSPEC Voice ACM Mode—Regulates mandatory admission control (ACM)
for the voice access category. By default, TSPEC Voice ACM mode is off.
The options are:
for the voice access category. By default, TSPEC Voice ACM mode is off.
The options are:
-
On—A station is required to send a TSPEC request for bandwidth to the
WAP device before sending or receiving a voice traffic stream. The WAP
device responds with the result of the request, which includes the
allotted medium time if the TSPEC was admitted.
WAP device before sending or receiving a voice traffic stream. The WAP
device responds with the result of the request, which includes the
allotted medium time if the TSPEC was admitted.
-
Off—A station can send and receive the voice priority traffic without
requiring an admitted TSPEC. The WAP device ignores voice TSPEC
requests from client stations.
requiring an admitted TSPEC. The WAP device ignores voice TSPEC
requests from client stations.
•
TSPEC Voice ACM Limit—The upper limit on the amount of traffic that the
WAP device attempts to transmit on the wireless medium using a voice AC
to gain access. The default limit is 20 percent of total traffic.
WAP device attempts to transmit on the wireless medium using a voice AC
to gain access. The default limit is 20 percent of total traffic.
•
TSPEC Video ACM Mode —Regulates mandatory admission control for the
video access category. By default, TSPEC Video ACM mode is off. The
options are:
video access category. By default, TSPEC Video ACM mode is off. The
options are:
-
On — A station is required to send a TSPEC request for bandwidth to the
WAP device before sending or receiving a video traffic stream. The WAP
device responds with the result of the request, which includes the
allotted medium time if the TSPEC was admitted.
WAP device before sending or receiving a video traffic stream. The WAP
device responds with the result of the request, which includes the
allotted medium time if the TSPEC was admitted.
-
Off — A station can send and receive video priority traffic without
requiring an admitted TSPEC; the WAP device ignores video TSPEC
requests from client stations.
requiring an admitted TSPEC; the WAP device ignores video TSPEC
requests from client stations.
•
TSPEC Video ACM Limit—The upper limit on the amount of traffic that the
WAP device attempts to transmit on the wireless medium using a video AC
to gain access. The default limit is 15 percent of total traffic.
WAP device attempts to transmit on the wireless medium using a video AC
to gain access. The default limit is 15 percent of total traffic.