Cisco Cisco Aironet 1200 Access Point Notas de publicación
14
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(8)JED1
OL-20669-02
Important Notes
•
Uplink failed
•
Radio failed
•
Rogue access point found.
The command syntax is as follows:
logging facility <facility name> event <event name> severity <severity level>
The facility name option has 4 options:
•
1. system
•
2. dot11
•
3. radius
•
4. link
The command is available only if one of the facility names is selected.
The event name selections depends on the facility name selected. Supported events and subevents for
the respective facilities are shown in the following table:
the respective facilities are shown in the following table:
•
The severity level specifies the maximum severity level to report and print a system logging
message. There are 8 severity levels available, which are shown in the following table:
message. There are 8 severity levels available, which are shown in the following table:
Facility Name
Event
Subevent
system
clock
config
logger (12.3(8)JED1
only)
reload
restart
config
logger (12.3(8)JED1
only)
reload
restart
–
dot11
uplink
radio
rogue ap
ssid
radio
rogue ap
ssid
failed, down
load
load
no-ssid-or-no-vlan
rogue ap
–
–
radius
down
up
up
–
link
interface
up-down, link-changed
DHCP
address-assign
SNMP
cold-start
–
LINE
up-down
–
Severity Level
Logging Severity Level Description
0. emergencies
System is unusable
1 alerts
Immediate action needed
2. critical
Critical conditions
3. errors
Error conditions
4. warnings
Warning conditions
5. notifications
Normal but significant conditions