Cisco Cisco Aironet 1200 Access Point Notas de publicación
5
Release Notes for Cisco Aironet Conversion Tool Version 2.1 for Cisco IOS Software
OL-6225-01
Important Notes
Important Notes
This section describes important information about the upgrade of 350 series access points to IOS
software. For more information on Cisco IOS releases for access points, refer to the release notes for
specific releases.
software. For more information on Cisco IOS releases for access points, refer to the release notes for
specific releases.
Some Fields Not Updated During Upgrade to IOS Software
During the access point’s power-up sequence after an upgrade to IOS software, some fields reported in
the console messages are blank or are populated with zeros. However, blank or zero fields are normal
after a successful upgrade, because 350 and 1200 series access points do not support that information.
This example shows fields that might appear blank or populated with zeros:
the console messages are blank or are populated with zeros. However, blank or zero fields are normal
after a successful upgrade, because 350 and 1200 series access points do not support that information.
This example shows fields that might appear blank or populated with zeros:
32K bytes of flash-simulated non-volatile configuration memory.
Base Ethernet MAC Address: 00:05:9A:38:42:91
Part Number
:
0-0000-00
PCA Assembly Number
:
000-00000-00
PCA Revision Number
:
PCB Serial Number
:
Top Assembly Part Number
:
000-00000-00
Top Assembly Serial Number
:
Top Revision Number
:
Product/Model Number
:
AIR-AP352-IOS-UPGRD
Cisco Aironet Software Requires Completion of Encryption Authorization Form
In order to access Cisco Aironet software from the Software Center on Cisco.com, you must now fill out
a form to receive authorization to download encrypted software. Registered Cisco.com users are required
to fill out the form only once, while public users must do so once each session, each time software is
downloaded. A form is automatically created for public users. The form for Registered Cisco.com users
is located at the following URL:
a form to receive authorization to download encrypted software. Registered Cisco.com users are required
to fill out the form only once, while public users must do so once each session, each time software is
downloaded. A form is automatically created for public users. The form for Registered Cisco.com users
is located at the following URL:
http://www.cisco.com/cgi-bin/Software/Crypto/crypto_main.pl
Obtaining Software
Obtaining the Conversion Tool Software
To obtain the latest conversion tool software from the Cisco Web site, follow these steps:
Step 1
Use your web browser to go to the Cisco Software Center at the following URL:
Step 2
Select Option #2: Aironet Wireless Software Display Tables.
Step 3
Under Cisco Aironet Wireless Access Point Firmware and Utilities, select Cisco Aironet Conversion
Tool or Cisco IOS Software.
Tool or Cisco IOS Software.
Step 4
Select conversion tool file Aironet-AP-Cisco-IOS-Conversion-Tool-v2.1.exe (where v2.1
is the
version number).