Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento
Wireless
Quality of Service
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
100
5
551/561
STEP 1
For WAP561 devices, select the radio interface on which to configure QoS settings (Radio 1 or
Radio 2).
Radio 2).
STEP 2
Select an option from the EDCA Template list:
•
WFA Defaults—Populates the WAP device and Station EDCA parameters with WiFi
Alliance default values, which are best for general, mixed traffic.
Alliance default values, which are best for general, mixed traffic.
•
Optimized for Voice—Populates the WAP device and Station EDCA parameters with
values that are best for voice traffic.
values that are best for voice traffic.
•
Custom—Enables you to choose custom EDCA parameters.
These four queues are defined for different types of data transmitted from WAP-to-station. If
you choose a Custom template, the parameters that define the queues are configurable;
otherwise, they are set to predefined values appropriate to your selection. The four queues are:
you choose a Custom template, the parameters that define the queues are configurable;
otherwise, they are set to predefined values appropriate to your selection. The four queues are:
•
Data 0 (Voice)—High priority queue, minimum delay. Time-sensitive data such as VoIP
and streaming media are automatically sent to this queue.
and streaming media are automatically sent to this queue.
•
Data 1 (Video)—High priority queue, minimum delay. Time-sensitive video data is
automatically sent to this queue.
automatically sent to this queue.