Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento
System Security
RADIUS Server
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
106
6
STEP 1
Select System Security > RADIUS Server in the navigation pane.
RADIUS Server
STEP 2
Enter the parameters:
•
Server IP Address Type—The IP version that the RADIUS server uses.
You can toggle between the address types to configure IPv4 and IPv6 global RADIUS
address settings, but the WAP device contacts only the RADIUS server or servers of the
address type you select in this field.
address settings, but the WAP device contacts only the RADIUS server or servers of the
address type you select in this field.
•
Server IP Address 1 or Server IPv6 Address 1—The addresses for the primary global
RADIUS server.
RADIUS server.
When the first wireless client tries to authenticate with the WAP device, the device
sends an authentication request to the primary server. If the primary server responds to
the authentication request, the WAP device continues to use this RADIUS server as the
primary server, and authentication requests are sent to the address specified.
sends an authentication request to the primary server. If the primary server responds to
the authentication request, the WAP device continues to use this RADIUS server as the
primary server, and authentication requests are sent to the address specified.
•
Server IP Address (2 through 4) or Server IPv6 Address (2 through 4)—Up to three
backup IPv4 or IPv6 RADIUS server addresses.
backup IPv4 or IPv6 RADIUS server addresses.
If authentication fails with the primary server, each configured backup server is tried in
sequence.
sequence.
•
Key 1—The shared secret key that the WAP device uses to authenticate to the primary
RADIUS server.
RADIUS server.