Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento

Simple Network Management Protocol

Targets

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

137

8

•

Authentication Type—The type of authentication to use on SNMPv3 requests from the 
user, which can be one of these options:

-

MD5—Require MD5 authentication on SNMP requests from the user.

-

None—SNMPv3 requests from this user require no authentication.

•

Authentication Pass Phrase—(If you specify MD5 as the Authentication Type) A pass 
phrase to enable the SNMP agent to authenticate requests sent by the user. The pass 
phrase must be between 8 and 32 characters in length.

•

Encryption Type—The type of privacy to use on SNMP requests from the user, which 
can be one of these options:

-

DES—Use DES encryption on SNMPv3 requests from the user.

-

None—SNMPv3 requests from this user require no privacy.

•

Encryption Pass Phrase—(If you specify DES as the privacy type) A pass phrase to use 
to encrypt the SNMP requests. The pass phrase must be between 8 and 32 characters in 
length.

STEP  5

Click Save. The user is added to the SNMPv3 Users list and your changes are saved to the 
Startup Configuration.

NOTE

To remove a user, select the user in the list and click Delete.

Targets

SNMPv3 targets send SNMP notifications using Inform messages to the SNMP Manager. For 
SNMPv3 targets, only Informs are sent, not traps. For SNMP versions 1 and 2, traps are sent. 
Each target is defined with a target IP address, UDP port, and SNMPv3 user name.

NOTE

SNMPv3 user configuration (see the 

 page) should be completed before configuring 

SNMPv3 targets.

NOTE

The WAP device supports a maximum of eight targets.