Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento
LAN
IPv6 Addresses
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
55
4
VLAN 1 is the both default untagged VLAN and the default management VLAN. If you
want to segregate management traffic from the untagged VLAN traffic, configure the
new VLAN ID at your router, and then use this new VLAN ID on your WAP device.
want to segregate management traffic from the untagged VLAN traffic, configure the
new VLAN ID at your router, and then use this new VLAN ID on your WAP device.
•
Management VLAN ID—The VLAN associated with the IP address you use to access
the WAP device. Provide a number between 1 and 4094 for the Management VLAN ID.
The default is 1.
the WAP device. Provide a number between 1 and 4094 for the Management VLAN ID.
The default is 1.
This VLAN is also the default untagged VLAN. If you already have a management
VLAN configured on your network with a different VLAN ID, you must change the
VLAN ID of the management VLAN on the WAP device.
VLAN configured on your network with a different VLAN ID, you must change the
VLAN ID of the management VLAN on the WAP device.
STEP 3
Configure these IPv4 settings:
•
Connection Type—By default, the DHCP client on the Cisco WAP551 and WAP561
Access Point automatically broadcasts requests for network information. If you want to
use a static IP address, you must disable the DHCP client and manually configure the
IP address and other network information.
Access Point automatically broadcasts requests for network information. If you want to
use a static IP address, you must disable the DHCP client and manually configure the
IP address and other network information.
Select one of these values from the list:
-
DHCP—The WAP device acquires its IP address from a DHCP server on the LAN.
-
Static IP—You manually configure the IPv4 address. The IPv4 address should be in
a form similar to xxx.xxx.xxx.xxx (192.0.2.10).
a form similar to xxx.xxx.xxx.xxx (192.0.2.10).
•
Static IP Address, Subnet Mask, and Default Gateway—If you elected to assign a static
IP address, enter the IP information.
IP address, enter the IP information.
•
Domain Name Servers—Select an option from the list:
-
Dynamic—The WAP device acquires DNS server addresses from a DHCP server
on the LAN.
on the LAN.
-
Manual—You manually configure one or more DNS server addresses. Enter up to
two IP addresses in the text boxes.
two IP addresses in the text boxes.
STEP 4
Click Save. The changes are saved to the Startup Configuration.
NOTE
After new settings are saved, the corresponding processes may be stopped and restarted. When
this happens, the WAP device may lose connectivity. We recommend that you change WAP
device settings when a loss of connectivity will least affect your wireless clients.
this happens, the WAP device may lose connectivity. We recommend that you change WAP
device settings when a loss of connectivity will least affect your wireless clients.
IPv6 Addresses
You can use the IPv6 Addresses page to configure the WAP device to use IPv6 addresses.