Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento
Wireless
Radio
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
59
5
STEP 1
Select Wireless > Radio in the navigation pane.
Radio
121/321
551/561
STEP 2
In the Global Settings area, configure the TSPEC Violation Interval, which is the time interval
in seconds for the WAP device to report associated clients that do not adhere to mandatory
admission control procedures. The reporting occurs through the system log and SNMP traps.
Enter a time from 0 to 900 seconds. The default is 300 seconds.
in seconds for the WAP device to report associated clients that do not adhere to mandatory
admission control procedures. The reporting occurs through the system log and SNMP traps.
Enter a time from 0 to 900 seconds. The default is 300 seconds.
STEP 3
In the Basic Settings area, configure these settings:
NOTE
Local regulations may prohibit the use of certain radio modes. Not all modes are
available in all countries.
•
Radio—Turns on or off the radio interface. By default, the radio is off.
•
MAC Address—The Media Access Control (MAC) address for the interface. The MAC
address is assigned by the manufacturer and cannot be changed.
address is assigned by the manufacturer and cannot be changed.
•
Mode—The IEEE 802.11 standard and frequency the radio uses. one of the available
modes:
modes: